[Characteristics and Identification Priority Source of Heavy Metals Pollution in Farmland Soils in the Yellow River Basin].

Assessments of the soil environmental quality of farmland and pollution source apportionment are the foundation for ensuring national food security and agricultural sustainable development, as well as an important prerequisite for the pursuit to keep our lands clean. This study evaluated the characteristics of heavy metal pollution in farmland soils in the Yellow River Basin from 2000 to 2023, based on the data of heavy metal contents including As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, using the geo-accumulation index method. Source apportionment was conducted by employing a positive matrix factorization (PMF) model. The probabilistic health risks were evaluated by coupling Monte Carlo simulation with a human health risk assessment model, and priority pollution sources and elements were identified. The results showed that:① the average content of all heavy metals in farmland soils within the study area was lower than the screening values specified in the soil environment quality risk control standard for soil contamination of agriculture land (GB 15618-2018) (pH>7.5). However, the contents of Cd, As, and Zn in the samples exceeded their screening values, with percentages of 21.69%, 5.56%, and 1.23%, respectively, with Cd having the highest rate of exceedance. ② Hg and Cd were moderately polluted, Cu and Pb were slightly polluted, and the other elements were not polluted. ③ The main sources of heavy metals in farmland soil were traffic-industrial sources, natural-agricultural sources, industrial-natural sources, and agricultural-industrial sources, with contribution rates of 37.04%, 26.69%, 21.72%, and 14.55%, respectively. ④ Heavy metals in farmland soil posed carcinogenic health risks to adults and children but did not have non-carcinogenic risks; As and Cd were priority control elements for human health risks, and industrial-natural sources and agricultural-industrial sources were priority control sources in the study area.

Pollution and source-specific risk analysis of potentially toxic metals in urban soils of an oasis-tourist city in northwest China.

Source-specific risk apportionment for soil potentially toxic metals (PTMs) is of great significance for contamination prevention and risk management in urban environments. Eighty-five urban soil samples were obtained from an oasis-tourist city, China and examined for eight PTMs (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn). The pollution levels, sources, and ecological risk of soil PTMs were quantified, and their source-specific ecological and human health effects were also estimated using the multi-proxy approaches. The results demonstrated that accumulation of Cd, Hg, Pb, Cr, Cu, and Zn in soils was observed compared to their background levels, and the soils experienced varying degrees of PTMs pollution, especially at sites with high-intensity anthropogenic activities. Natural sources, atmospheric deposition, industrial sources, vehicular emissions, and comprehensive inputs were the principal sources, with contributions of 29.28%, 25.86%, 20.13%, 16.50%, and 8.23%, respectively. The integrated ecological risks of PTMs in soils were moderate at most sites, with atmospheric deposition being the dominant contributor to ecological risks. Children exhibited pronounced non-cancer risks, but adults had no notable non-cancer risks. Moreover, there were potential carcinogenic risks for both children and adults within the study region. Non-cancer and carcinogenic risks were more significant for children than adults, and traffic emissions were the primary contributor to non-cancer risks (adults: 20.53%, children: 20.49%) and carcinogenic risks (adults: 22.95%, children: 22.08%). The industrial and traffic activities were considered as priority control sources for soil pollution control and risk management, with Hg, Cd, Zn, and Pb corresponding to the priority elements. This study highlights the source-specific ecological and human health effects of PTMs pollution in urban soils, thereby providing valuable information for targeted pollution control and priority source management.

[Contamination Characteristics and Source Apportionment of Potentially Toxic Elements in Soil around the Coal-fired Power Plant Using APCS-MLR and PMF Models].

To investigate the characteristics and sources of potentially toxic elemental contamination in soils around the coal-fired power plant, we selected the soil around the Jingyuan power plant as the object of investigation. Thirty-six and 27 soil samples collected from the urban and farmland areas were analyzed for PTEs (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn), respectively. We employed the geoaccumulation index, single-factor pollution index, and improved Nemerow integrated pollution index to evaluate the contamination characteristics of PTEs, and combined correlation analysis with absolute principal component scores-multiple linear regression (APCS-MLR) and positive matrix factorization (PMF) receptor models were used to quantitatively analyze the pollution sources of PTEs. The results revealed that all the average concentrations of other soil metals around Jingyuan power plant exceeded their corresponding background values of Gansu Province, except for As, in agricultural soil, and Hg exhibited significant spatial non-homogeneity, and thus it was visibly affected by anthropogenic activities. The values of the single-factor pollution and geoaccumulation indices indicated that the soils of both sites were mainly contaminated with Cd, Cr, Ni, and Pb, and Hg contamination was reflected in wide areas for both sites. Additionally, the results of the improved Nemerow index demonstrated that the investigated soil was between moderately contaminated and heavily contaminated. Further, the comprehensive pollution degree of urban soil was higher than that of agricultural soil. Moreover, source apportionment revealed that PTEs in urban soil were derived from mixed sources of traffic activities and coal combustion, mixed sources of traffic activities and industrial and mining activities, and atmospheric deposition from industrial activities, with contribution rates of APCS-MLR of 35.2%, 25.1%, and 23.4%, respectively. The PMF contribution rates were 40.2%, 12.4%, and 47.7%, respectively. PTEs in agricultural soil were from one mixture source of industrial, mining, agricultural, and traffic sources, and the other mixed source was of traffic activities and coal combustion, with a APCS-MLR contribution rate of 40.3% and 35.9% and a contribution rate of PMF of 36.2% and 18.0%, respectively. In addition, another mixed source of agricultural activities and coal combustion was obtained using the PMF model, with a contribution rate of 48.5%.

Contamination, ecological-health risks, and sources of potentially toxic elements in road-dust sediments and soils of the largest urban riverfront scenic park in China.

Identifying the contamination and sources of potentially toxic elements (PTEs) in road-dust sediment (RDS) and the surrounding greenspace soil of urban environments and understanding their ecological-health risks are important for pollution management and public health. The contamination characteristics, ecological and probabilistic health risks, and source apportionment of eight PTEs (Cd, Pb, Cr, Cu, Ni, As, Zn, and Hg) in the Yellow River Custom Tourist Line of Lanzhou, which is the largest open urban riverfront scenic park in China, were investigated. The results showed that all the RDS PTE mean concentrations exceeded their soil background values, whereas for the surrounding greenspace soils, the concentrations of the PTEs, except for Cr and Ni, were also higher than their local background levels. Moreover, the RDS-soil system was mainly contaminated by Cd, Zn, Pb, Cu, and Hg to varying degrees, and the integrated ecological risks of PTEs in the RDS and soil were high and considerable at most sites, respectively. The probabilistic health risk assessment results demonstrated that the non-carcinogenic hazard risk for humans was negligible, but the total carcinogenic risks should be considered. Source apportionment using a positive matrix factorization model combined with multivariate statistical analyses revealed that Cr, Ni, and As in the RDS-soil system were from natural and industrial sources, Cd, Pb, Zn, Cu came from vehicle emissions and pesticide and fertilizer applications, and Hg was from natural and industrial sources and utilization of pesticides with fertilizers. This work provides scientific evidence for urban planning and human health protection in urban environments.

[Pollution Characteristics and Risk Assessment of Heavy Metals in Surface Dusts and Surrounding Green Land Soils from Yellow River Custom Tourist Line in Lanzhou].

In order to investigate the contamination levels of dust and its surrounding green land soil heavy metal pollution and potential ecological and health risks in the scenic areas of urban waterfront parks, the gardens, squares, and theme parks of the Yellow River Custom Tourist Line in Lanzhou were selected as the research area, using 27 dust samples and 26 soil samples from its surrounding green lands. The contamination characteristics and potential ecological risks of eight heavy metals (Cr, Ni, Cu, Zn, As, Cd, Hg, and Pb) were evaluated using the geo-accumulation index (Igeo), single-factor pollution index (Pi), Nemerow integrated pollution index (PN), and improved potential ecological risk index (RI). The human health risk assessment was also evaluated using the exposure risk model. The results showed that the average concentrations of the other heavy metals in the surface dusts were higher than the background values of Gansu Province and Lanzhou City, except that the As mean concentrations in the surface dusts and the surrounding green land soils were slightly lower than the Gansu Province background values. For its surrounding green land soils, the mean concentrations of the other heavy metals (Cu, Zn, Cd, Hg, and Pb) exceeded the soil background values of Gansu Province and Lanzhou City, whereas the Cr and Ni mean concentrations were lower than their corresponding soil background values of Gansu Province and Lanzhou City. The geo-accumulation and single-factor pollution indices demonstrated that a slight to moderate pollution of Cr, Cu, Zn, Cd, Hg, and Pb occurred in surface dusts, and Cu, Zn, Cd, Hg, and Pb appeared in varying degrees of contamination levels in its surrounding green land soils. The Nemerow integrated pollution index analysis manifested that the overall contamination status of the study areas was between slightly and heavily polluted. The potential ecological risk index suggested that Cd and Hg were recognized as significant pollutant elements and that the RI of the other heavy metals were all below 40, presenting slight ecological risk. The health risk assessment indicated that ingestion was the dominant exposure pathway for heavy metals from the surface dusts and the surrounding green land soils, and no carcinogenic and noncarcinogenic risks posed threats to adults and children.

Induction of a high-yield lovastatin mutant of Aspergillus terreus by ¹²C6⁺ heavy-ion beam irradiation and the influence of culture conditions on lovastatin production under submerged fermentation.

Heavy-ion beams, possessing a wide mutation spectrum and increased mutation frequency, have been used effectively as a breeding method. In this study, the heavy-ion beams generated by the Heavy-Ion Research Facility in Lanzhou were used to mutagenize Aspergillus terreus CA99 for screening high-yield lovastatin strains. Furthermore, the main growth conditions as well as the influences of carbon and nitrogen sources on the growth and the lovastatin production of the mutant and the original strains were investigated comparatively. The spores of A. terreus CA99 were irradiated by 15, 20, 25, and 30 Gy of 80 MeV/u (12)C(6+) heavy-ion beams. Based on the lovastatin contents in the fermentation broth, a strain designated as A. terreus Z15-7 has been selected from the clone irradiated by the heavy-ion beam. When compared with the original strain, the content of lovastatin in the fermentation broth of A. terreus Z15-7 increased 4-fold. Moreover, A. terreus Z15-7 efficiently used the carbon and nitrogen sources for the growth and production of lovastatin when compared to the original strain. The maximum yield of lovastatin, 916.7 µg/ml, was obtained as A. terreus Z15-7 was submerged cultured in the chemically defined medium supplemented with 3% glycerol as a carbon source, 1% corn meal as an organic nitrogen source, and 0.2% sodium nitrate as an inorganic nitrogen source at 30 °C in the shake flask. The result shows that heavy-ion beam irradiation is an effective method for the mutation breeding of lovastatin production of A. terreus.